As described in the design considerations section below, there are many alterations that you can make to the basic design we will describe in this plan. We have provided dimensions for the select few who will be making exactly the version we are showing in this plan.

Before we dive into the project, let's take a look at how it will be constructed. The graphic on the right shows the isometric view. There are six vertical panels set into dadoes (or grooves) in both the back and bottom panels. Note that we will cut the dadoes or grooves into a larger piece of wood, and then cut it into two pieces to create the back and bottom. This technique simplifies the process, and guarantees that all of the dadoes or grooves will line up properly.

First, cut the plywood. To cut the pieces, use the drawing in the printable accompaniment as your guide; if you choose to make any variations, your cutting pattern will be different. For aesthetic reasons, the grain direction of the vertical panels should match. For the vertical panels, we will cut slightly oversized pieces which will be cut and sanded to the final dimensions in subsequent steps. The backs and bottoms of the vertical panels should be cut on the table saw to ensure that these two surfaces are square to each other. All of the other cuts can be made with a bandsaw or jig saw.